Cable Repairs in Utah

Signs you need cable repairs

• A cable hanging loose, unspooled, or piled at the drum
• Visible fraying, kinks, or rust on the cable
• The door lifts crooked or one side lags behind
• The door is stuck at an angle in the track
• Grinding or slipping sounds at the drum during travel

How the work is done

1. 1

   Secure the door

   The door is clamped and supported, and spring tension is managed before any cable or bracket is touched.

2. 2

   Replace in pairs

   Both cables are replaced with correctly sized sets so the door lifts evenly rather than pulling to one side.

3. 3

   Reset the drums

   Cables are wound evenly on the drums with equal tension, and the drums and bearings are checked for wear and grooving.

4. 4

   Balance and test

   Spring tension is verified, the door is balance-tested, and the opener force is rechecked after the repair.

What affects the price

• Replacing one damaged cable versus a matched pair
• Condition of the drums, bearings, and bottom brackets
• Spring adjustment needed to rebalance the door
• Track or panel damage caused when the cable failed

Cable Repairs questions

What causes a garage door cable to snap?

Cables usually fail from rust, fraying at the bottom bracket, worn drums, or an out-of-balance door that loads one side harder than the other.

Can I use my garage door with a broken cable?

No. With one cable broken, the door lifts unevenly, can bind in the track, or drop on one side. Leave it closed and have it repaired before operating it again.

Should both garage door cables be replaced together?

Yes. Both cables age at the same rate, and matched replacement keeps lift even and prevents the second cable failing shortly after the first.

How long do garage door cables last?

Typically 8 to 15 years, though moisture, salt, and an out-of-balance door shorten that considerably.